Stumpwork Embroidery Kit - MOTHER HEN & PERIWINKLE
$132.00
Sold Out
The design measures 9cm x 12cm wide (3 1/2” x 4 3/4”).
** LEVEL 2 **
MOTHER HEN & PERIWINKLE is an ideal project if you are comfortable with general embroidery stitches and have a little experience with Raised Embroidery.
The detailed instructions and diagrams will help guide you step by step through the project.
IN THIS KIT YOU WILL FIND:
* INSTRUCTION BOOKLET with detailed, step-by-step instructions and diagrams
* Full size patterns & templates for the detached elements
* Light olive green print cotton with the design marked, ready to stitch
* Quilter's muslin backing fabric
* 2 pieces of cotton homespun
* Wool felt
* 16 stranded silk threads
* 2 stranded cotton threads
* Glass seed beads
* 5 needles
* Beading wire
YOU WILL ALSO NEED:
* 20cm (8") embroidery hoop, inner ring bound
* 10cm (4") embroidery hoop, inner ring bound
* Hoop stand, Weight or small clamp (To hold your hoop, allowing you both hands free)
* Light coloured sewing thread
* Fine, Sharp embroidery scissors
* Small pliers (or old scissor for cutting fine wire)
* Sharp HB pencil (a mechanical pencil it perfect)
* Baking (or tracing) paper
* Tape
Highly recommended, but not essential:
* Fine tip, curved scissors
* Tweezers or small pliers for shaping wire
MOTHER HEN & PERIWINKLE is embroidered onto light olive green print cotton fabric with stranded silk threads, using mostly common embroidery stitches and simple raised embroidery techniques. Layers of felt are used to create the hen’s plump body and her head and wing are embroidered separately before being attached to the main embroidery. The detached periwinkle flowers are stitched in place with a seed beads at the centers and the two buds are stitched with needle-woven picots. Detached leaves with wired edges complete the periwinkle vine
PLEASE NOTE
This kit is for personal use only. Your purchase does not transfer copyright and is an agreement that you will not forward, duplicate or sell the instructions, designs or finished items.
Thank you for understanding and respecting my hard work. ~ Anna
** LEVEL 2 **
MOTHER HEN & PERIWINKLE is an ideal project if you are comfortable with general embroidery stitches and have a little experience with Raised Embroidery.
The detailed instructions and diagrams will help guide you step by step through the project.
IN THIS KIT YOU WILL FIND:
* INSTRUCTION BOOKLET with detailed, step-by-step instructions and diagrams
* Full size patterns & templates for the detached elements
* Light olive green print cotton with the design marked, ready to stitch
* Quilter's muslin backing fabric
* 2 pieces of cotton homespun
* Wool felt
* 16 stranded silk threads
* 2 stranded cotton threads
* Glass seed beads
* 5 needles
* Beading wire
YOU WILL ALSO NEED:
* 20cm (8") embroidery hoop, inner ring bound
* 10cm (4") embroidery hoop, inner ring bound
* Hoop stand, Weight or small clamp (To hold your hoop, allowing you both hands free)
* Light coloured sewing thread
* Fine, Sharp embroidery scissors
* Small pliers (or old scissor for cutting fine wire)
* Sharp HB pencil (a mechanical pencil it perfect)
* Baking (or tracing) paper
* Tape
Highly recommended, but not essential:
* Fine tip, curved scissors
* Tweezers or small pliers for shaping wire
MOTHER HEN & PERIWINKLE is embroidered onto light olive green print cotton fabric with stranded silk threads, using mostly common embroidery stitches and simple raised embroidery techniques. Layers of felt are used to create the hen’s plump body and her head and wing are embroidered separately before being attached to the main embroidery. The detached periwinkle flowers are stitched in place with a seed beads at the centers and the two buds are stitched with needle-woven picots. Detached leaves with wired edges complete the periwinkle vine
PLEASE NOTE
This kit is for personal use only. Your purchase does not transfer copyright and is an agreement that you will not forward, duplicate or sell the instructions, designs or finished items.
Thank you for understanding and respecting my hard work. ~ Anna
The design measures 9cm x 12cm wide (3 1/2” x 4 3/4”).
** LEVEL 2 **
MOTHER HEN & PERIWINKLE is an ideal project if you are comfortable with general embroidery stitches and have a little experience with Raised Embroidery.
The detailed instructions and diagrams will help guide you step by step through the project.
IN THIS KIT YOU WILL FIND:
* INSTRUCTION BOOKLET with detailed, step-by-step instructions and diagrams
* Full size patterns & templates for the detached elements
* Light olive green print cotton with the design marked, ready to stitch
* Quilter's muslin backing fabric
* 2 pieces of cotton homespun
* Wool felt
* 16 stranded silk threads
* 2 stranded cotton threads
* Glass seed beads
* 5 needles
* Beading wire
YOU WILL ALSO NEED:
* 20cm (8") embroidery hoop, inner ring bound
* 10cm (4") embroidery hoop, inner ring bound
* Hoop stand, Weight or small clamp (To hold your hoop, allowing you both hands free)
* Light coloured sewing thread
* Fine, Sharp embroidery scissors
* Small pliers (or old scissor for cutting fine wire)
* Sharp HB pencil (a mechanical pencil it perfect)
* Baking (or tracing) paper
* Tape
Highly recommended, but not essential:
* Fine tip, curved scissors
* Tweezers or small pliers for shaping wire
MOTHER HEN & PERIWINKLE is embroidered onto light olive green print cotton fabric with stranded silk threads, using mostly common embroidery stitches and simple raised embroidery techniques. Layers of felt are used to create the hen’s plump body and her head and wing are embroidered separately before being attached to the main embroidery. The detached periwinkle flowers are stitched in place with a seed beads at the centers and the two buds are stitched with needle-woven picots. Detached leaves with wired edges complete the periwinkle vine
PLEASE NOTE
This kit is for personal use only. Your purchase does not transfer copyright and is an agreement that you will not forward, duplicate or sell the instructions, designs or finished items.
Thank you for understanding and respecting my hard work. ~ Anna
** LEVEL 2 **
MOTHER HEN & PERIWINKLE is an ideal project if you are comfortable with general embroidery stitches and have a little experience with Raised Embroidery.
The detailed instructions and diagrams will help guide you step by step through the project.
IN THIS KIT YOU WILL FIND:
* INSTRUCTION BOOKLET with detailed, step-by-step instructions and diagrams
* Full size patterns & templates for the detached elements
* Light olive green print cotton with the design marked, ready to stitch
* Quilter's muslin backing fabric
* 2 pieces of cotton homespun
* Wool felt
* 16 stranded silk threads
* 2 stranded cotton threads
* Glass seed beads
* 5 needles
* Beading wire
YOU WILL ALSO NEED:
* 20cm (8") embroidery hoop, inner ring bound
* 10cm (4") embroidery hoop, inner ring bound
* Hoop stand, Weight or small clamp (To hold your hoop, allowing you both hands free)
* Light coloured sewing thread
* Fine, Sharp embroidery scissors
* Small pliers (or old scissor for cutting fine wire)
* Sharp HB pencil (a mechanical pencil it perfect)
* Baking (or tracing) paper
* Tape
Highly recommended, but not essential:
* Fine tip, curved scissors
* Tweezers or small pliers for shaping wire
MOTHER HEN & PERIWINKLE is embroidered onto light olive green print cotton fabric with stranded silk threads, using mostly common embroidery stitches and simple raised embroidery techniques. Layers of felt are used to create the hen’s plump body and her head and wing are embroidered separately before being attached to the main embroidery. The detached periwinkle flowers are stitched in place with a seed beads at the centers and the two buds are stitched with needle-woven picots. Detached leaves with wired edges complete the periwinkle vine
PLEASE NOTE
This kit is for personal use only. Your purchase does not transfer copyright and is an agreement that you will not forward, duplicate or sell the instructions, designs or finished items.
Thank you for understanding and respecting my hard work. ~ Anna
The design measures 9cm x 12cm wide (3 1/2” x 4 3/4”).
** LEVEL 2 **
MOTHER HEN & PERIWINKLE is an ideal project if you are comfortable with general embroidery stitches and have a little experience with Raised Embroidery.
The detailed instructions and diagrams will help guide you step by step through the project.
IN THIS KIT YOU WILL FIND:
* INSTRUCTION BOOKLET with detailed, step-by-step instructions and diagrams
* Full size patterns & templates for the detached elements
* Light olive green print cotton with the design marked, ready to stitch
* Quilter's muslin backing fabric
* 2 pieces of cotton homespun
* Wool felt
* 16 stranded silk threads
* 2 stranded cotton threads
* Glass seed beads
* 5 needles
* Beading wire
YOU WILL ALSO NEED:
* 20cm (8") embroidery hoop, inner ring bound
* 10cm (4") embroidery hoop, inner ring bound
* Hoop stand, Weight or small clamp (To hold your hoop, allowing you both hands free)
* Light coloured sewing thread
* Fine, Sharp embroidery scissors
* Small pliers (or old scissor for cutting fine wire)
* Sharp HB pencil (a mechanical pencil it perfect)
* Baking (or tracing) paper
* Tape
Highly recommended, but not essential:
* Fine tip, curved scissors
* Tweezers or small pliers for shaping wire
MOTHER HEN & PERIWINKLE is embroidered onto light olive green print cotton fabric with stranded silk threads, using mostly common embroidery stitches and simple raised embroidery techniques. Layers of felt are used to create the hen’s plump body and her head and wing are embroidered separately before being attached to the main embroidery. The detached periwinkle flowers are stitched in place with a seed beads at the centers and the two buds are stitched with needle-woven picots. Detached leaves with wired edges complete the periwinkle vine
PLEASE NOTE
This kit is for personal use only. Your purchase does not transfer copyright and is an agreement that you will not forward, duplicate or sell the instructions, designs or finished items.
Thank you for understanding and respecting my hard work. ~ Anna
** LEVEL 2 **
MOTHER HEN & PERIWINKLE is an ideal project if you are comfortable with general embroidery stitches and have a little experience with Raised Embroidery.
The detailed instructions and diagrams will help guide you step by step through the project.
IN THIS KIT YOU WILL FIND:
* INSTRUCTION BOOKLET with detailed, step-by-step instructions and diagrams
* Full size patterns & templates for the detached elements
* Light olive green print cotton with the design marked, ready to stitch
* Quilter's muslin backing fabric
* 2 pieces of cotton homespun
* Wool felt
* 16 stranded silk threads
* 2 stranded cotton threads
* Glass seed beads
* 5 needles
* Beading wire
YOU WILL ALSO NEED:
* 20cm (8") embroidery hoop, inner ring bound
* 10cm (4") embroidery hoop, inner ring bound
* Hoop stand, Weight or small clamp (To hold your hoop, allowing you both hands free)
* Light coloured sewing thread
* Fine, Sharp embroidery scissors
* Small pliers (or old scissor for cutting fine wire)
* Sharp HB pencil (a mechanical pencil it perfect)
* Baking (or tracing) paper
* Tape
Highly recommended, but not essential:
* Fine tip, curved scissors
* Tweezers or small pliers for shaping wire
MOTHER HEN & PERIWINKLE is embroidered onto light olive green print cotton fabric with stranded silk threads, using mostly common embroidery stitches and simple raised embroidery techniques. Layers of felt are used to create the hen’s plump body and her head and wing are embroidered separately before being attached to the main embroidery. The detached periwinkle flowers are stitched in place with a seed beads at the centers and the two buds are stitched with needle-woven picots. Detached leaves with wired edges complete the periwinkle vine
PLEASE NOTE
This kit is for personal use only. Your purchase does not transfer copyright and is an agreement that you will not forward, duplicate or sell the instructions, designs or finished items.
Thank you for understanding and respecting my hard work. ~ Anna